Tetra Pak
finishing board
Interior finishing board made from 100% recycled Tetra Pak cartons, melted down (cellulose fibre + aluminium + polymers). 3 finishes: Basic (plain), Design (visible structure), Surface (facade). Negative carbon footprint of -10.58 kgCO₂/m².
What is a Tetra Pak finishing board?
Recycled Tetra Pak finishing board is an interior fit-out material made from post-consumer packaging cartons, shredded and melted down with no added binder. Cellulose fibre makes up most of the material, aluminium provides rigidity and the polymers moisture resistance.
The resulting board is hard and uniform and handles like chipboard, on a timber or metal frame. Three finishes are available: plain, with a visible structure, or treated for exterior use, depending on the appearance sought.
It is suited to interior stud partitions, wall linings, furniture tops and acoustic panels.
It is manufactured in Europe, originally in Sweden, with active distribution in the Benelux since 2025 and a production unit in Luxembourg planned for the near future. At end of life, the board returns to the Tetra Pak stream and can be remelted to become raw material again.
Installation & uses
The board is installed like chipboard, with standard joinery tools. It is cut with a saw or a utility knife depending on the thickness, and fixed by screwing to timber or steel studs.
It is suited to interior stud partitions, wall linings, office or kitchen furniture tops, and acoustic panels. A complete system called ERW GreenWALL combines it with paper studs and biobased insulation for a fully circular partition.
The visible surface can be painted, lacquered or covered with a renovation wallpaper. Lining paper is recommended on large smooth surfaces.
At end of life, the board returns to the Tetra Pak stream and is remelted to become raw material for a new batch.
About the producer
Recoma is a European producer of Swedish origin, based in Hässleholm, specialising in fit-out boards made from post-consumer Tetra Pak cartons. The process fully melts down the packaging, with no added resin, to produce a hard, water-repellent board.
The company has been active in the Benelux since 2025, with a branch in Brussels, and is preparing a production unit in Luxembourg in the near future, as part of a short supply chain strategy.
Technical performance
CE marking available
FAQ
Is Tetra Pak board loadbearing?
No. It is non-structural and is used to finish walls, partitions, ceilings and furniture. Its mechanical strength is higher than that of OSB, plywood and chipboard. With a double layer of PackWall, it reaches security class SK2 under SSF 1047, tested by RISE, and fire resistance of up to EI 120 in a partition build-up.
What is its embodied carbon?
−10.58 kg CO₂e per m², a negative figure. EPD International v2 declaration, compliant with EN 15804+A2 and ISO 14025.
Which thickness should I choose?
Mainly 12 mm, in the Basic and Extra Fine finishes. Other thicknesses are made to order.
What happens to it at end of life?
It is recyclable and returns to the Tetra Pak stream. The plastic content from the original packaging limits its biodegradability, but the material loop is complete. The stated service life exceeds fifty years.
Alongside
Same layer, same use · three materials to compare.
Paper mill sludge and recycled paper, resin-free. Honext · Barcelona.
Dry mineral screed (granite/lava/limestone). Lithotherm · Germany.
Reconditioned raised access floor (wood core + sheet steel). Mobius · Brussels.